VM-3360E VM Extension Amplifier 360W

VM-3360E VM Extension Amplifier 360W

VM-3360E VM Extension Amplifier 360W

VM-3360E

VM-3360E একটি মাল্টি ফাংশনাল অ্যামপ্লিফায়ার যা EIA-Standard অনুযায়ী equipment rack (3-unit size)। স্পীকার অউটপুট সেকশনের ইন্টার্নাল অ্যাটেনুয়েটর  এবং ৬-আউটপুট সিলেক্টর আছে। এর সার্ভ্যালেন্স ফাংশনের সাহায্যে স্বয়ংক্রিয়ভাবে সিস্টেম ফেইলিওর চেক করা যায়। 

EN সার্টিফিকেশন

Power Source 230 V AC, 50/60 Hz
Power Consumption 850 W (with rated output signal), 380 W (according to EN62368-1)
Rated Output 360 W
Frequency Response 50 Hz - 20 kHz, ±3 dB (at 1/3 rated output)
Distortion 0.7 % or less (at rated output, 1 kHz)
S/N Ratio 85 dB or more
Input External amplifier input: 100 V line, removable terminal block (14 pins)
Output Speaker output 1 - 2: Max. (360 W) per output
Speaker output 3 - 6: Max. (120 W) per output
Speaker output 1 - 6: Total within 360 W, removable terminal block (14 pins)
Allowable minimum load: 500 Ω (20 W) at 100 V line for speaker line failure detection
Direct output: Direct output from internal or external amplifier,
removable terminal block (16 pins)
VM Link Input: Connecting the VM-3240VA or VM-3360VA, RJ45 female connector
Output: Connecting the VM-3240E or VM-3360E, RJ45 female connector
Maximum distance: 800 m (874.89 yd)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
EXT PA Link Connecting the VP-2421, RJ45 female connector
Maximum distance: 5 m (16.4 ft)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
General Control Input 1 - 8: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, removable terminal block (14 pins)
Output 1 - 8: Isolated open collector output, withstand voltage: 30 V DC,
operating current: 10 mA or less, removable terminal block (14 pins)
Emergency Control Input 1 - 5: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, RJ45 female connector
Input 6: Isolated voltage input, Inactive: -24 V ±20 %, Active: +24 V ±20 %,
RJ45 female connector
Status out: Relay contact output, withstand voltage: 40 V DC,
operating current: 2 - 300 mA, RJ45 female connector
ATT Control Relay contact 1-6, 125 V AC or 30 V DC, total under 5 A,
removable terminal block (16 pins)
Power Input/Output Power in: Connecting the VX-2000DS only (operating range: 20 - 40 V DC)
PS out: 28 V DC/24 A
M4 screw terminal, distance between barriers: 11 mm (0.43")
DC24V Output 24 V DC, Maximum feeding current 0.3 A
Ds Link Connecting the VX-2000DS, RJ45 female connector
Maximum distance: 5 m (16.4 ft)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
Operating Temperature -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)
Operating Humidity 5 % to 95 %RH (no condensation)
Finish Panel: Aluminum, hairline, black
Case: Surface-treated steel plate, black, paint
Dimensions 482 (W) × 132.6 (H) × 407 (D) mm (18.98" × 5.22" × 16.02")
Weight 19 kg (41.89 lb)
Accessory Power cable (2 m (6.56 ft)) …1, Link cable (3 m (9.84 ft)) …2,
Removable terminal plug (14 pins) …3, Removable terminal plug (16 pins) …1

Scroll to top